QJMotor has given the 600RR motorcycle a complete overhaul for its 2022 version. Launched two years ago, the 600RR was the first four-cylinder product from QJMotor wrapping the underpinnings of the TNT600i in a fully-faired sportsbike offering. The newly redesigned front fascia has more than a hint of Ducati to it – especially with those carbon-effect winglets – and the side profile is quite reminiscent of the Honda CBR650R sold in India. This continues the trend of Chinese brands ‘borrowing’ design elements from established manufacturers in the two-wheeler marketplace.
The new bodywork has helped reduce the
weight of the 600RR by 2kg, bringing the wet weight down to 213kg – which is
still a little heavier than the likes of the Honda CBR650R. The fuel tank size
has gone up by 1.6 litres bringing the total capacity up to a substantial 18
litres. The rear of the bike has followed the modern-era sportbike trend of
sharper and higher tail sections, with the 600RR’s tail rising up by 50mm.
However, the rider’s seat is now closer to the ground by 10mm, making for a
friendly 800mm seat height. Full LED lighting is standard. According to
QJMotor, the winglets aren’t entirely for show, providing 5kg to 6kg of
downforce at 150 km/h, while improving stability at higher speeds as well.
While the chassis remains unchanged, the
engine does get a small bump up in power and torque. This is largely due to a
redesigned exhaust system with reduced back pressure and a 5 percent reduction
in internal engine friction. The numbers now stand at 87.2 hp (up from 81 hp) and
56 Nm (up from 52Nm), arriving at 11,500 rpm and 10,500 rpm respectively.
Equipment levels are quite impressive with
a (non-adjustable) upside-down KYB front fork and an adjustable monoshock at
the rear. Braking duties are handled by dual 4-piston radially mounted Brembo
calipers paired to a radial master cylinder at the front and a single
two-piston caliper at the back with dual-channel ABS as standard. There’s
traction control, riding modes and a quickshifter, albeit it only works on
upshifts. The QJ gets a 5-inch TFT display that will show you the traction
control level and rider modes selected and a USB-C port as standard.
