Carbon fibre is as
intriguing a material as any. Woven strands of graphite are bound in resin to
create a composite that is extremely strong and lightweight, and the black
fabric pattern has become so iconic that it has become de rigueur in the
supercar world.
The car
manufacturers have gone to great lengths to showcase the weave underneath, with
whole cars having been finished in nothing but a clear coat. However,
Koenigsegg has one-upped them all by building its first Regera entirely out of
completely bare carbon fibre – a finish the Swedish company calls Koenigsegg
Naked Carbon (KNC).
The material uses
no lacquers, varnishes or other coatings, and even the thin outer layer of
epoxy that comes from curing the piece in an autoclave has been polished away
by hand. The result is a finish that is cold to the touch, and the now fully
exposed graphite fibres produce a metallic sheen. Koenigsegg has built KNC
components before, such as wheels, wings, splitters, winglets and steering
wheels, but never an entire car.
To make sure KNC
stands up to the elements, the company left sample parts outside for several
years, going through the summer heat and winter cold. Indeed, Angelholm claims
that the surface finish is more durable than lacquers, as the exposed carbon is
stiffer and thus less sensitive to stone chips and scratches. What’s more,
because of the lack of any paint, lacquer or epoxy on the surface, the KNC
Regera – destined for a Swiss customer – is actually around 20 kg lighter than
a “standard” Regera.
As you’d expect,
it’s a delicate process to strip the epoxy, as one stroke too many would ruin
the carbon threads. The process also requires the parts to come out of
production absolutely flawless, as imperfect surfaces cannot be smoothened out
or adjusted. Koenigsegg says this is a testament to the extreme tolerances and
quality control inherent in its production process.
The rest of the
Regera is pretty extraordinary as well, as it’s Koenigsegg’s first hybrid
supercar. It gets a monstrous 1,100 hp 5.0 litre biturbo V8 paired with three
electric motors to produce over 1,500 hp and 2,000 Nm of torque, but the most
bizarre thing is that the engine is connected directly to the rear wheels,
assisted not by a traditional gearbox but by a torque converter.
It’s no surprise,
then, that this plug-in hybrid is exceedingly quick. It will get to 100 km/h in
just 2.8 seconds before blowing past 200 km/h in 6.6 seconds, 300 km/h in 10.9
seconds and 400 km/h in a scarcely believable 20 seconds. It will also get from
150 to 250 km/h in a blistering 3.9 seconds.